Monday, October 4th, 2010 at
7:34 pm
- HQRP® Solar Charge Controller plus HQRP® Coaster;
- Regulation point:14.4 Volt; Low voltage disconnect:11.1 Volt;
- Low voltage Reconnect: 12.5 Volt; Self-consumption: 6mA maximum;
- Electronic protections; Terminals:for wire sizes to 2.5mm2;
- Type of Charging: series PWM.
Products trademarked HQRP® are marketed and sold exclusively by Osprey-Talon. Regulations point: 14.4 Volts; Low voltage Disconnect: 11.1V Volts; Low voltage Reconnect: 13.1 Volts; Microcontroller digital accuracy; Type of Charging: Series PWM & stat of charge(SOC); 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging; Electronic protections: Short circuit and over current-solar and load; Reverse current at night; Limits high voltage to protect loads; Lighting protection; Tropicalization: Conformal coated printed circuit board; Self-consumption: 6mA maximum. Solar Controller supports up to 150W of 12V Solar panels and up to 300W of 24V Solar panels. For 12V solar panels, please, use battery and load for 12V solar systems (For 24V solar panels, please, use battery and load for 24V solar systems).
Rating: 
(out of 4 reviews)
Price: $ 27.91
5 Pairs MC4 solar panel connector 5 male & 5 female
Solar Panel Charger Controller Regulator 12-24V 20A
dc amp volt meter digital for wind turbine generator or solar panel 12/24v Scorp
Solar Panel Charger Regulator Controller 10A/12V/24V Safe Protection CE Certify
Tags:
150W,
Battery,
Charge,
Charging,
Coaster,
Controller,
HQRP,
Panel,
plus,
POWER,
Regulator,
Review,
SOLAR,
Type
Sunday, August 15th, 2010 at
7:37 pm
- Charge controller prevents overcharging of 12-volt batteries
- Intended for use with 12-volt solar panels
- Handles up to 30 amps of array current and up to 500 watts of solar power
- Continuously display the charging current or battery voltage on the LCD digital meter
- Automatically indicates the charged condition of your battery on the LED bar graph
The Sunforce 60032 30 Amp Digital Charge Controller prevents overcharging of 12-volt batteries. It is intended for use with 12-volt solar panels, and can handle up to 30 amps of array current and up to 500 watts of solar power. The controller will continuously display the charging current or battery voltage on the LCD digital meter, and also automatically indicates the charged condition of your battery on the LED bar graph. The 60032 is designed to work with all kinds of 12-volt solar panels for indoor use.
Rating: 
(out of 18 reviews)
List Price: $ 129.99
Price: $ 83.23
NEW~1200W GRID TIE INVERTER 28V-52V DC/110V AC 60Hz FOR SOLAR PANEL/WIND TURBINE
600W GRID TIE INVERTER 14-28V DC/110V AC 60Hz FOR WIND TURBINE/SOLAR PANEL POWER
130w solar panel, 24V system 130 watt High efficiency !
1pc 0.29W 2V 145mA Mini Solar Panel GP60*60-4B145
Related Solar Panel Products
Tags:
60032,
Charge,
Controller,
Digital,
Review,
Sunforce
Monday, July 26th, 2010 at
7:38 pm
- Charge controller prevents overcharging of 12-volt batteries
- Intended for use with 12-volt solar panels
- Handles up to 7 amps of array current and up to 100 watts of solar power
- Charging light indicates the battery is charging, and a green light indicates a fully charged battery
- Measures 4 x 1 x 2.5 inches (WxHxD) and weighs one pound
The Sunforce 60012 7 Amp Charge Controller prevents overcharging of 12-volt batteries. It is intended for use with 12-volt solar panels, and can handle up to 7 amps of array current and up to 100 watts of solar power. The controller is easy to use with a charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery. The 60012 measures 4 x 1 x 2.5 inches (WxHxD) and weighs one pound.
Rating: (out of 27 reviews)
List Price: $ 29.99
Price: $ 24.99
Related Solar Charger Products
Tags:
Charge,
Controller,
Sunforce
