1500 Watt DIY Do It Yourself Wind Turbine/Generator Kit 61″ Blade Review

Sunday, July 18th, 2010 at 7:41 pm

1500 Watt DIY Do It Yourself Wind Turbine/Generator Kit 61″ Blade

3 Fiberglass Blades (61″) (~10.5′ rotor diameter)
24 Strong Neodymium Magnets (2″x1″x1/2″)
11 Lb Spool Magnet Wire (Gauge: 14 AWG)
A Wind Turbine Recipe Book by Hugh Piggott
Hub w/ Hardware and a Nose Cone

All items are BRAND NEW, never used and straight from the manufacturer

FEATURES:

Blades: Our blades are made from lightweight, yet durable fiberglass. With a S809 airfoil design, pronounced pitch, and tapered tip, these blades will start at the slowest wind speeds and give you power with low noise levels. They have a polished finish for aesthetics that will make you proud.
Hub: Our steel hub is designed specifically for the blades. It has a tapered hole to securely lock it down onto a 1″ shaft.
Magnets: 24 Super Strong Neodymium (NdFeB) magnets – 2″x1″x.5″ N42
Wire: 1 Spool Essex Brand magnet wire rated at 200 degrees Celcius or 392 degrees Farenheit. Each spool averages 11 lbs weight. 14 gauge wire.
A Wind Turbine Recipe Book by Hugh Piggott. Mr. Piggott is with Scoraig Wind Electric in the U.K. and has written several books on creating your own wind turbine systems. The plan provides very detailed info to guide you through the process. All the rest material is also listed in th